(PHP 5 >= 5.1.2, PHP 7, PHP 8, PECL hash >= 1.1)
hash_hmac — 使用 HMAC 方法生成带有密钥的散列值
algo
要使用的散列算法的名称（例如：“sha256”）。
可以在 hash_hmac_algos() 中查看当前支持的算法。
注意:
不允许使用非加密哈希函数。
data要进行散列运算的消息。
key使用 HMAC 生成信息摘要时所使用的密钥。
binary
如果 binary 设置为 true，则返回原始二进制数据表示的信息摘要，否则返回
16 进制小写字符串格式表示的信息摘要。
如果 algo 未知或非加密散列函数，则抛出
ValueError 异常。
| 版本 | 说明 |
|---|---|
| 8.0.0 |
如果 algo 未知或者非加密散列函数，现在将抛出
ValueError 异常；以前返回 false。
|
| 7.2.0 | 不再支持非加密的散列函数（adler32、crc32、crc32b、fnv132、fnv1a32、fnv164、fnv1a64、joaat）。 |
示例 #1 hash_hmac() 示例
<?php
echo hash_hmac('sha256', 'The quick brown fox jumped over the lazy dog.', 'secret');
?>以上示例会输出：
9c5c42422b03f0ee32949920649445e417b2c634050833c5165704b825c2a53b
Very important notice, if you pass array to $data, php will generate a Warning, return a NULL and continue your application. Which I think is critical vulnerability as this function used to check authorisation typically.
Example:
<?php
var_dump(hash_hmac('sha256', [], 'secret'));
WARNING hash_hmac() expects parameter 2 to be string, array given on line number 3
NULL
?>
Of course not documented feature.Please be careful when comparing hashes. In certain cases, information can be leaked by using a timing attack. It takes advantage of the == operator only comparing until it finds a difference in the two strings. To prevent it, you have two options.
Option 1: hash both hashed strings first - this doesn't stop the timing difference, but it makes the information useless.
<?php
if (md5($hashed_value) === md5($hashed_expected)) {
echo "hashes match!";
}
?>
Option 2: always compare the whole string.
<?php
if (hash_compare($hashed_value, $hashed_expected)) {
echo "hashes match!";
}
function hash_compare($a, $b) {
if (!is_string($a) || !is_string($b)) {
return false;
}
$len = strlen($a);
if ($len !== strlen($b)) {
return false;
}
$status = 0;
for ($i = 0; $i < $len; $i++) {
$status |= ord($a[$i]) ^ ord($b[$i]);
}
return $status === 0;
}
?>As Michael uggests we should take care not to compare the hash using == (or ===). Since PHP version 5.6 we can now use hash_equals().
So the example will be:
<?php
if (hash_equals($hashed_expected, $hashed_value) ) {
echo "hashes match!";
}
?>While implementing a TOTP application, please note that hash_hmac() must receive data in binary, not in a hexadecimal string, to generate a valid OTP across platforms.
This problem can be easily fixed by converting a hexadecimal string to its binary form before passing it to hash_hmac().
<?php
$time = hex2bin('0000000003523f77'); // time must be in this "hexadecimal and padded" form
$key = hex2bin('bb57d1...'); // 160-bits = 40-digit hexadecimal (4 bits) = 32-digit base32 (5 bits)
hash_hmac('sha1', $time, $key);
?>Sometimes a hosting provider doesn't provide access to the Hash extension. Here is a clone of the hash_hmac function you can use in the event you need an HMAC generator and Hash is not available. It's only usable with MD5 and SHA1 encryption algorithms, but its output is identical to the official hash_hmac function (so far at least).
<?php
function custom_hmac($algo, $data, $key, $raw_output = false)
{
$algo = strtolower($algo);
$pack = 'H'.strlen($algo('test'));
$size = 64;
$opad = str_repeat(chr(0x5C), $size);
$ipad = str_repeat(chr(0x36), $size);
if (strlen($key) > $size) {
$key = str_pad(pack($pack, $algo($key)), $size, chr(0x00));
} else {
$key = str_pad($key, $size, chr(0x00));
}
for ($i = 0; $i < strlen($key) - 1; $i++) {
$opad[$i] = $opad[$i] ^ $key[$i];
$ipad[$i] = $ipad[$i] ^ $key[$i];
}
$output = $algo($opad.pack($pack, $algo($ipad.$data)));
return ($raw_output) ? pack($pack, $output) : $output;
}
?>
Example Use:
<?php
custom_hmac('sha1', 'Hello, world!', 'secret', true);
?>A function implementing the algorithm outlined in RFC 6238 (http://tools.ietf.org/html/rfc6238)
<?php
/**
* This function implements the algorithm outlined
* in RFC 6238 for Time-Based One-Time Passwords
*
* @link http://tools.ietf.org/html/rfc6238
* @param string $key the string to use for the HMAC key
* @param mixed $time a value that reflects a time (unix
* time in the example)
* @param int $digits the desired length of the OTP
* @param string $crypto the desired HMAC crypto algorithm
* @return string the generated OTP
*/
function oauth_totp($key, $time, $digits=8, $crypto='sha256')
{
$digits = intval($digits);
$result = null;
// Convert counter to binary (64-bit)
$data = pack('NNC*', $time >> 32, $time & 0xFFFFFFFF);
// Pad to 8 chars (if necessary)
if (strlen ($data) < 8) {
$data = str_pad($data, 8, chr(0), STR_PAD_LEFT);
}
// Get the hash
$hash = hash_hmac($crypto, $data, $key);
// Grab the offset
$offset = 2 * hexdec(substr($hash, strlen($hash) - 1, 1));
// Grab the portion we're interested in
$binary = hexdec(substr($hash, $offset, 8)) & 0x7fffffff;
// Modulus
$result = $binary % pow(10, $digits);
// Pad (if necessary)
$result = str_pad($result, $digits, "0", STR_PAD_LEFT);
return $result;
}
?>Here is an efficient PBDKF2 implementation:
<?php
/*
* PBKDF2 key derivation function as defined by RSA's PKCS #5: https://www.ietf.org/rfc/rfc2898.txt
* $algorithm - The hash algorithm to use. Recommended: SHA256
* $password - The password.
* $salt - A salt that is unique to the password.
* $count - Iteration count. Higher is better, but slower. Recommended: At least 1024.
* $key_length - The length of the derived key in bytes.
* $raw_output - If true, the key is returned in raw binary format. Hex encoded otherwise.
* Returns: A $key_length-byte key derived from the password and salt.
*
* Test vectors can be found here: https://www.ietf.org/rfc/rfc6070.txt
*
* This implementation of PBKDF2 was originally created by defuse.ca
* With improvements by variations-of-shadow.com
*/
function pbkdf2($algorithm, $password, $salt, $count, $key_length, $raw_output = false)
{
$algorithm = strtolower($algorithm);
if(!in_array($algorithm, hash_algos(), true))
die('PBKDF2 ERROR: Invalid hash algorithm.');
if($count <= 0 || $key_length <= 0)
die('PBKDF2 ERROR: Invalid parameters.');
$hash_length = strlen(hash($algorithm, "", true));
$block_count = ceil($key_length / $hash_length);
$output = "";
for($i = 1; $i <= $block_count; $i++) {
// $i encoded as 4 bytes, big endian.
$last = $salt . pack("N", $i);
// first iteration
$last = $xorsum = hash_hmac($algorithm, $last, $password, true);
// perform the other $count - 1 iterations
for ($j = 1; $j < $count; $j++) {
$xorsum ^= ($last = hash_hmac($algorithm, $last, $password, true));
}
$output .= $xorsum;
}
if($raw_output)
return substr($output, 0, $key_length);
else
return bin2hex(substr($output, 0, $key_length));
}
?>For signing an Amazon AWS query, base64-encode the binary value:
<?php
$Sig = base64_encode(hash_hmac('sha256', $Request, $AmazonSecretKey, true));
?>The Implementation of the PBKDF2 key derivation function as described in RFC 2898 can be used to not only get the hashed KEY but also a specific IV.
To use, one would use it as follows:-
<?php
$p = str_hash_pbkdf2($pw, $salt, 10, 32, 'sha1');
$p = base64_encode($p);
$iv = str_hash_pbkdf2($pw, $salt, 10, 16, 'sha1', 32);
$iv = base64_encode($iv);
?>
The function should be:-
<?php
// PBKDF2 Implementation (described in RFC 2898)
//
// @param string p password
// @param string s salt
// @param int c iteration count (use 1000 or higher)
// @param int kl derived key length
// @param string a hash algorithm
// @param int st start position of result
//
// @return string derived key
function str_hash_pbkdf2($p, $s, $c, $kl, $a = 'sha256', $st=0)
{
$kb = $start+$kl; // Key blocks to compute
$dk = ''; // Derived key
// Create key
for ($block=1; $block<=$kb; $block++)
{
// Initial hash for this block
$ib = $h = hash_hmac($a, $s . pack('N', $block), $p, true);
// Perform block iterations
for ($i=1; $i<$c; $i++)
{
// XOR each iterate
$ib ^= ($h = hash_hmac($a, $h, $p, true));
}
$dk .= $ib; // Append iterated block
}
// Return derived key of correct length
return substr($dk, $start, $kl);
}
?>Simple implementation of hmac sha1
<?php
function hmac_sha1($key, $data)
{
// Adjust key to exactly 64 bytes
if (strlen($key) > 64) {
$key = str_pad(sha1($key, true), 64, chr(0));
}
if (strlen($key) < 64) {
$key = str_pad($key, 64, chr(0));
}
// Outter and Inner pad
$opad = str_repeat(chr(0x5C), 64);
$ipad = str_repeat(chr(0x36), 64);
// Xor key with opad & ipad
for ($i = 0; $i < strlen($key); $i++) {
$opad[$i] = $opad[$i] ^ $key[$i];
$ipad[$i] = $ipad[$i] ^ $key[$i];
}
return sha1($opad.sha1($ipad.$data, true));
}Function for those, who really need to use crc32 algorithm in PHP>7.1
<?php
function hash_hmac_crc32(string $key, string $data): string
{
$b = 4;
if (strlen($key) > $b) {
$key = pack("H*", hash('crc32', $key));
}
$key = str_pad($key, $b, chr(0x00));
$ipad = str_pad('', $b, chr(0x36));
$opad = str_pad('', $b, chr(0x5c));
$k_ipad = $key ^ $ipad;
$k_opad = $key ^ $opad;
return hash('crc32', $k_opad . hash('crc32', $k_ipad . $data, true));
}
?>