Константи, описані нижче — визначені цим розширенням, тож доступні, коли розширення скомпільовано як частина PHP або динамічно підключене під час виконання.
Constant | Description |
---|---|
STREAM_FILTER_READ |
Used with stream_filter_append() and stream_filter_prepend() to indicate that the specified filter should only be applied when reading |
STREAM_FILTER_WRITE |
Used with stream_filter_append() and stream_filter_prepend() to indicate that the specified filter should only be applied when writing |
STREAM_FILTER_ALL |
This constant is equivalent to
STREAM_FILTER_READ | STREAM_FILTER_WRITE
|
PSFS_PASS_ON |
Return Code indicating that the
userspace filter returned buckets in $out .
|
PSFS_FEED_ME |
Return Code indicating that the
userspace filter did not return buckets in $out
(i.e. No data available).
|
PSFS_ERR_FATAL |
Return Code indicating that the
userspace filter encountered an unrecoverable error
(i.e. Invalid data received).
|
PSFS_FLAG_NORMAL |
Regular read/write. |
PSFS_FLAG_FLUSH_INC |
An incremental flush. |
PSFS_FLAG_FLUSH_CLOSE |
Final flush prior to closing. |
STREAM_USE_PATH |
Flag indicating if the stream
used the include path.
|
STREAM_REPORT_ERRORS |
Flag indicating if the wrapper
is responsible for raising errors using trigger_error()
during opening of the stream. If this flag is not set, you
should not raise any errors.
|
STREAM_CLIENT_ASYNC_CONNECT |
Open client socket asynchronously. This option must be used
together with the STREAM_CLIENT_CONNECT flag.
Used with stream_socket_client().
|
STREAM_CLIENT_CONNECT |
Open client socket connection. Client sockets should always include this flag. Used with stream_socket_client(). |
STREAM_CLIENT_PERSISTENT |
Client socket opened with stream_socket_client() should remain persistent between page loads. |
STREAM_SERVER_BIND |
Tells a stream created with stream_socket_server() to bind to the specified target. Server sockets should always include this flag. |
STREAM_SERVER_LISTEN |
Tells a stream created with stream_socket_server()
and bound using the STREAM_SERVER_BIND flag to start
listening on the socket. Connection-orientated transports (such as TCP)
must use this flag, otherwise the server socket will not be enabled.
Using this flag for connect-less transports (such as UDP) is an error.
|
STREAM_NOTIFY_RESOLVE |
A remote address required for this stream has been resolved, or the resolution
failed. See severity for an indication of which happened.
|
STREAM_NOTIFY_CONNECT |
A connection with an external resource has been established. |
STREAM_NOTIFY_AUTH_REQUIRED |
Additional authorization is required to access the specified resource.
Typical issued with severity level of
STREAM_NOTIFY_SEVERITY_ERR .
|
STREAM_NOTIFY_MIME_TYPE_IS |
The mime-type of resource has been identified,
refer to message for a description of the
discovered type.
|
STREAM_NOTIFY_FILE_SIZE_IS |
The size of the resource has been discovered.
|
STREAM_NOTIFY_REDIRECTED |
The external resource has redirected the stream to an alternate
location. Refer to message .
|
STREAM_NOTIFY_PROGRESS |
Indicates current progress of the stream transfer in
bytes_transferred and possibly
bytes_max as well.
|
STREAM_NOTIFY_COMPLETED |
There is no more data available on the stream. |
STREAM_NOTIFY_FAILURE |
A generic error occurred on the stream, consult
message and message_code
for details.
|
STREAM_NOTIFY_AUTH_RESULT |
Authorization has been completed (with or without success). |
STREAM_NOTIFY_SEVERITY_INFO |
Normal, non-error related, notification. |
STREAM_NOTIFY_SEVERITY_WARN |
Non critical error condition. Processing may continue. |
STREAM_NOTIFY_SEVERITY_ERR |
A critical error occurred. Processing cannot continue. |
STREAM_IPPROTO_ICMP + |
Provides a ICMP socket. |
STREAM_IPPROTO_IP + |
Provides a IP socket. |
STREAM_IPPROTO_RAW + |
Provides a RAW socket. |
STREAM_IPPROTO_TCP + |
Provides a TCP socket. |
STREAM_IPPROTO_UDP + |
Provides a UDP socket. |
STREAM_PF_INET + |
Internet Protocol Version 4 (IPv4). |
STREAM_PF_INET6 + |
Internet Protocol Version 6 (IPv6). |
STREAM_PF_UNIX + |
Unix system internal protocols. |
STREAM_SOCK_DGRAM + |
Provides datagrams, which are connectionless messages (UDP, for example). |
STREAM_SOCK_RAW + |
Provides a raw socket, which provides access to internal network protocols and interfaces. Usually this type of socket is just available to the root user. |
STREAM_SOCK_RDM + |
Provides a RDM (Reliably-delivered messages) socket. |
STREAM_SOCK_SEQPACKET + |
Provides a sequenced packet stream socket. |
STREAM_SOCK_STREAM + |
Provides sequenced, two-way byte streams with a transmission mechanism for out-of-band data (TCP, for example). |
STREAM_SHUT_RD |
Used with stream_socket_shutdown() to disable further receptions. |
STREAM_SHUT_WR |
Used with stream_socket_shutdown() to disable further transmissions. |
STREAM_SHUT_RDWR |
Used with stream_socket_shutdown() to disable further receptions and transmissions. |
STREAM_CAST_FOR_SELECT |
Stream casting, for when stream_select() is calling stream_cast(). |
STREAM_CAST_AS_STREAM |
Stream casting, when stream_cast() is called otherwise (see above). |
STREAM_META_TOUCH |
Used with stream_metadata(), to specify touch() call. |
STREAM_META_OWNER |
Used with stream_metadata(), to specify chown() call. |
STREAM_META_OWNER_NAME |
Used with stream_metadata(), to specify chown() call. |
STREAM_META_GROUP |
Used with stream_metadata(), to specify chgrp() call. |
STREAM_META_GROUP_NAME |
Used with stream_metadata(), to specify chgrp() call. |
STREAM_META_ACCESS |
Used with stream_metadata(), to specify chmod() call. |
STREAM_BUFFER_NONE |
No buffering. |
STREAM_BUFFER_LINE |
Line buffering. |
STREAM_BUFFER_FULL |
Full buffering. |
STREAM_CRYPTO_METHOD_ANY_CLIENT |
Any TLS or SSL version on a client stream. |
STREAM_CRYPTO_METHOD_SSLv2_CLIENT |
SSL 2.0 on a client stream. |
STREAM_CRYPTO_METHOD_SSLv3_CLIENT |
SSL 3 on a client stream. |
STREAM_CRYPTO_METHOD_SSLv23_CLIENT |
TLS 1.0, 1.1 or 1.2 on a client stream. |
STREAM_CRYPTO_METHOD_TLS_CLIENT |
Any TLS version on a client stream. |
STREAM_CRYPTO_METHOD_TLSv1_0_CLIENT |
TLS 1.0 on a client stream. |
STREAM_CRYPTO_METHOD_TLSv1_1_CLIENT |
TLS 1.1 on a client stream. |
STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT |
TLS 1.2 on a client stream. |
STREAM_CRYPTO_METHOD_TLSv1_3_CLIENT |
TLS 1.3 on a client stream. |
STREAM_CRYPTO_METHOD_ANY_SERVER |
Any TLS or SSL version on a server stream. |
STREAM_CRYPTO_METHOD_SSLv2_SERVER |
SSL 2 on a server stream. |
STREAM_CRYPTO_METHOD_SSLv3_SERVER |
SSL 3 on a server stream. |
STREAM_CRYPTO_METHOD_SSLv23_SERVER |
TLS 1.0, 1.1 or 1.2 on a server stream. |
STREAM_CRYPTO_METHOD_TLS_SERVER |
Any TLS version on a server stream. |
STREAM_CRYPTO_METHOD_TLSv1_0_SERVER |
TLS 1.0 on a server stream. |
STREAM_CRYPTO_METHOD_TLSv1_1_SERVER |
TLS 1.1 on a server stream. |
STREAM_CRYPTO_METHOD_TLSv1_2_SERVER |
TLS 1.2 on a server stream. |
STREAM_CRYPTO_METHOD_TLSv1_3_SERVER |
TLS 1.3 on a server stream. |
STREAM_CRYPTO_PROTO_SSLv3 |
Псевдонім STREAM_CRYPTO_METHOD_SSLv3_SERVER .
|
STREAM_CRYPTO_PROTO_TLSv1_0 |
Псевдонім STREAM_CRYPTO_METHOD_TLSv1_0_SERVER .
|
STREAM_CRYPTO_PROTO_TLSv1_1 |
Псевдонім STREAM_CRYPTO_METHOD_TLSv1_1_SERVER .
|
STREAM_CRYPTO_PROTO_TLSv1_2 |
Псевдонім STREAM_CRYPTO_METHOD_TLSv1_2_SERVER .
|
STREAM_CRYPTO_PROTO_TLSv1_3 |
Псевдонім STREAM_CRYPTO_METHOD_TLSv1_3_SERVER .
|
STREAM_IGNORE_URL |
Do not use plugin wrappers. |
STREAM_MUST_SEEK |
Ensure stream is seekable. This may result in a copy of the stream being created. |
STREAM_MKDIR_RECURSIVE |
Recursive flag for the options parameters of mkdir() and rmdir(). |
STREAM_IS_URL |
Indicates that the stream is a URL. |
STREAM_URL_STAT_LINK |
Only information about the link itself should be returned, not the resource pointed to by the link. |
STREAM_URL_STAT_QUIET |
The wrapper should not raise any errors. |
STREAM_PEEK |
Retrieve data from the socket, but do not consume the buffer. Subsequent calls to fread() or stream_socket_recvfrom() will see the same data. |
STREAM_OOB |
Process OOB (out-of-band ) data.
|
STREAM_OPTION_BLOCKING |
Set blocking/non-blocking mode on a stream. |
STREAM_OPTION_READ_TIMEOUT |
Set read file buffering on a stream. |
STREAM_OPTION_WRITE_BUFFER |
Set write file buffering on a stream. |
STREAM_OPTION_READ_BUFFER |
Set read file buffering on a stream. |
Зауваження: The constants marked with
+
are meant to be used with stream_socket_pair(). Please note that some of these constants might not be available in your system.
Зауваження: The
STREAM_META_*
constants are meant to be used with stream_metadata().