(PECL ps >= 1.1.0)
ps_setcolor — Sets current color
$psdoc,$type,$colorspace,$c1,$c2,$c3,$c4Sets the color for drawing, filling, or both.
psdocResource identifier of the postscript file as returned by ps_new().
type
The parameter type can be
both, fill, or
fillstroke.
colorspace
The colorspace should be one of gray,
rgb, cmyk,
spot, pattern. Depending on the
colorspace either only the first, the first three or all parameters
will be used.
c1Depending on the colorspace this is either the red component (rgb), the cyan component (cmyk), the gray value (gray), the identifier of the spot color or the identifier of the pattern.
c2Depending on the colorspace this is either the green component (rgb), the magenta component (cmyk).
c3Depending on the colorspace this is either the blue component (rgb), the yellow component (cmyk).
c4This must only be set in cmyk colorspace and specifies the black component.
The second parameter is currently not always evaluated. The color is
sometimes set for filling and drawing just as if
fillstroke were passed.
Note that if you specify colors in RGB, the parameters C1, C2, and C3 should be specified in decimal form. To calculate this, divide the value by 255. Example: rgb(58,110,165) becomes <?php ps_setcolor($ps, "stroke", "rgb", .23, .43, .65, 0.0); ?>
However, since this is PostScript, most if not all files will be destined for printing and colors should be specified in CMYK anyway.