openssl_verify

(PHP 4 >= 4.0.4, PHP 5, PHP 7, PHP 8)

openssl_verify — Verify signature

Опис

openssl_verify() verifies that the signature is correct for the specified data using the public key associated with public_key. This must be the public key corresponding to the private key used for signing.

Параметри

data

The string of data used to generate the signature previously

signature

A raw binary string, generated by openssl_sign() or similar means

public_key

OpenSSLAsymmetricKey - a key, returned by openssl_get_publickey()

string - a PEM formatted key (e.g. -----BEGIN PUBLIC KEY----- MIIBCgK...)

algorithm

int - one of these Signature Algorithms.

string - a valid string returned by openssl_get_md_methods() example, "sha1WithRSAEncryption" or "sha512".

Значення, що повертаються

Returns 1 if the signature is correct, 0 if it is incorrect, and -1 or false on error.

Журнал змін

Версія	Опис
8.0.0	`public_key` accepts an OpenSSLAsymmetricKey or OpenSSLCertificate instance now; previously, a resource of type `OpenSSL key` or `OpenSSL X.509` was accepted.

Приклади

Приклад #1 openssl_verify() example

<?php
// $data and $signature are assumed to contain the data and the signature

// fetch public key from certificate and ready it
$pubkeyid = openssl_pkey_get_public("file://src/openssl-0.9.6/demos/sign/cert.pem");

// state whether signature is okay or not
$ok = openssl_verify($data, $signature, $pubkeyid);
if ($ok == 1) {
    echo "good";
} elseif ($ok == 0) {
    echo "bad";
} else {
    echo "ugly, error checking signature";
}
// free the key from memory
openssl_free_key($pubkeyid);
?>

Приклад #2 openssl_verify() example

<?php
//data you want to sign
$data = 'my data';

//create new private and public key
$private_key_res = openssl_pkey_new(array(
    "private_key_bits" => 2048,
    "private_key_type" => OPENSSL_KEYTYPE_RSA,
));
$details = openssl_pkey_get_details($private_key_res);
$public_key_res = openssl_pkey_get_public($details['key']);

//create signature
openssl_sign($data, $signature, $private_key_res, "sha256WithRSAEncryption");

//verify signature
$ok = openssl_verify($data, $signature, $public_key_res, OPENSSL_ALGO_SHA256);
if ($ok == 1) {
    echo "valid";
} elseif ($ok == 0) {
    echo "invalid";
} else {
    echo "error: ".openssl_error_string();
}
?>

Прогляньте також

openssl_sign() - Generate signature

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 8 notes

down

Stiv ¶

18 years ago

I've finally found a way to verify signature. Sample in the documentation doesn't work. Code bellow DOES work :)

<?php
// $data is assumed to contain the data to be signed

// fetch certificate from file and ready it
$fp = fopen("path/file.pem", "r");
$cert = fread($fp, 8192);
fclose($fp);

// state whether signature is okay or not
// use the certificate, not the public key
$ok = openssl_verify($data, $signature, $cert);
if ($ok == 1) {
    echo "good";
} elseif ($ok == 0) {
    echo "bad";
} else {
    echo "ugly, error checking signature";
}
?>

down

mikey at badpenguins dot com ¶

14 years ago

I spent days scouring the php openssl documentation trying to figure out how to do what sounds like a simple task - given two PEM encoded certificates, is one the signer of the other?  Nowhere in the openssl_verify() documentation or comments is it explained where to obtain the signature of an existing certificate.  The openssl_x509_parse() function looked promising, but it is an unstable API that may change.

I had to write my own code to determine if one cert signed another, it is located here: http://badpenguins.com/source/misc/isCertSigner.php?viewSource

In a nutshell here is what I learned...

The signature data in a signed X.509 certificate contains DER formatted data about the signature that is encrypted with the signers public key.  The data contains a hash of the original subject certificate and information about what encryption algorithm was used to create the signature.

So you need to get this signature data and a copy of the original certificate with the issuer and signature sequences removed.  Hash a copy of the original certificate (sans issuer/signature sequences) with the same algorithm the issuer used and if the hashes match, you have the issuer cert that signed the certificate.

down

meint dot post at bigfoot dot com ¶

23 years ago

Anbybody trying to get a Win32 CryptoAPI based digital signature component to work with the openssl_verify() function should be aware that the CryptoAPI PKCS1 (RSA) method uses bytes in reverse order while the openssl_verify() method expects a correctly formatted PKCS1 digital signature (as should be). I learned this the hard way and it took me some time to dig this out. A simple solution in VBScript to reverse the byte order:



N = Len(Blob.Hex)



' reverse bytes in the signature using Hex format 

For i = 1 To N - 1 Step 2 

    s = Mid(Blob, i, 2) & s 

Next 



s contains the digital signature in reverse order. Blob is an arbitrary binary container.



Send the signature off in Hex format and use a hex2bin method in PHP to convert to the correct format for openssl_verify(), i.e.



function hex2bin($data) {



    $len = strlen($data);

    return pack("H" . $len, $data);



} 



That's it, hope it helps out. BTW I used ASPEncrypt to toy around with on Win32 platform. Works only with Internet Explorer but you could also use a Java applet and have none of the abovementioned problems :-)

down

peter dot labos at gmail dot com ¶

6 years ago

openssl_verify() is populating openssl_error_string() even on false. 

When openssl_verify() returns 0, openssl_error_string() is populated with 1.
I spent lot of time to understand, while my next call to openssl was failing with checks for error.

<?php
$c = file_get_contents($filename);
$publicKey = openssl_pkey_get_public($c);
$result = openssl_verify('freedom', 'someirrelevantnosign', $publicKey);

$error = "";

while ($msg = openssl_error_string() !== false) {
    $error .= $msg;
}

if (!empty($error)) {
    echo $error; // 1
}

down

steve dot venable at lmco dot com ¶

22 years ago

A note about the openssl_verify() (and some of the other functions).  The public key comes from a certificate in any of the support formats (as the example shows, use openssl_get_publickey() to get the resource id).  But after some trial and error I found the signature string MUST BE BINARY.  While no error occurs, passing a base64-formatted signature string (PEM format?), you simply get a mismatch.  When I did the base64 decode myself, the verify returned a match (return value 1).  You can simply drop the begin/end lines and take the output of the 'base64_decode()' function.

down

phpdev at fpierrat dot fr ¶

3 years ago

As stated from the doc: "Returns 1 if the signature is correct, 0 if it is incorrect, and -1 or false on error. "

In the second example as a well as in Stiv's note, following condition will match for both 0 or false, which have different meaning:
elseif ($ok == 0) {
    echo "bad";
}

On should do an identical test here (===) instead of an equal test (==):
elseif ($ok === 0) {
    echo "bad";
}
---
var_dump(0==false); //==> true
var_dump(0===false);//==> false

down

attila dot m dot magyar at gmail dot com ¶

10 years ago

mikey at badpenguins dot com -- validating an X509 certificate chain in php seems to be possible with openssl_x509_checkpurpose()

down

jeremie dot gomez at gmail dot com ¶

13 years ago

You can actually use the public key as third parameter and not the certificate.

If you can't make it work, make sure that :

1) Your public key is well formatted. It seems that it must have the ----BEGIN PUBLIC KEY---- and ----END PUBLIC KEY----

2) Your signature is in binary format. You can use the php base64_decode for this.

＋add a note