PHP 8.4.1 Released!

    fseek

    (PHP 4, PHP 5, PHP 7, PHP 8)

    fseek — Seeks on a file pointer

    Опис

    fseek(resource $stream, int $offset, int $whence = SEEK_SET): int

    Sets the file position indicator for the file referenced by stream. The new position, measured in bytes from the beginning of the file, is obtained by adding offset to the position specified by whence.

    In general, it is allowed to seek past the end-of-file; if data is then written, reads in any unwritten region between the end-of-file and the sought position will yield bytes with value 0. However, certain streams may not support this behavior, especially when they have an underlying fixed size storage.

    Параметри

    stream

    Вказівник файлової системи типу resource, якого повертає функція fopen().

    offset

    The offset.

    To move to a position before the end-of-file, you need to pass a negative value in offset and set whence to SEEK_END.

    whence

    whence values are:

    • SEEK_SET - Set position equal to offset bytes.
    • SEEK_CUR - Set position to current location plus offset.
    • SEEK_END - Set position to end-of-file plus offset.

    Значення, що повертаються

    Upon success, returns 0; otherwise, returns -1.

    Приклади

    Приклад #1 fseek() example

    <?php

    $fp     = fopen('somefile.txt', 'r');

    // read some data
    $data = fgets($fp, 4096);

    // move back to the beginning of the file
    // same as rewind($fp);
    fseek($fp, 0);

    ?>

    Примітки

    Зауваження:

    If you have opened the file in append (a or a+) mode, any data you write to the file will always be appended, regardless of the file position, and the result of calling fseek() will be undefined.

    Зауваження:

    Not all streams support seeking. For those that do not support seeking, forward seeking from the current position is accomplished by reading and discarding data; other forms of seeking will fail.

    Прогляньте також

    • ftell() - Returns the current position of the file read/write pointer
    • rewind() - Rewind the position of a file pointer

    Improve This Page

    Learn How To Improve This Page • Submit a Pull Request • Report a Bug
    ＋add a note

    User Contributed Notes 25 notes

    up
    77
    seeker at example com
    16 years ago
    JUST TO QUOTE AND POINT THIS OUT:

    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    3. if you're using fseek() to write data to a file, remember to open the file in "r+"
    mode, example:

    $fp=fopen($filename,"r+");

    DON'T open the file in mode "a" (for append), because it puts
    the file pointer at the end of the file and doesn't let you
    fseek earlier positions in the file (it didn't for me!). Also,
    don't open the file in mode "w" -- although this puts you at
    the beginning of the file -- because it wipes out all data in
    the file.

    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Took me half a day to figure :/
    up
    19
    Anonymous
    13 years ago
    The official docs indicate that not all streams are seekable.
    You can try to seek anyway and handle failure:

    <?php
    if (fseek($stream, $offset, SEEK_CUR) === -1) {
    // whatever
    }
    ?>

    Or, you can use the stream_get_meta_data function:
    http://php.net/stream_get_meta_data

    <?php
    function fseekable($stream) {
    $meta = stream_get_meta_data($stream);
    return     $meta['seekable'];
    }
    ?>
    up
    12
    synnus at gmail dot com
    10 years ago
    Write Dummy File 4GB in Php 32bits (X86)
    if you want write more GB File (>4GB), use Php(X64) .
    this file is created in 0.0041329860687256 second

    CreatFileDummy('data_test.txt',4294967296);

    FUNCTION CreatFileDummy($file_name,$size) {
    // 32bits 4 294 967 296 bytes MAX Size
    $f = fopen($file_name, 'wb');
    if($size >= 1000000000) {
    $z = ($size / 1000000000);
    if (is_float($z)) {
    $z = round($z,0);
    fseek($f, ( $size - ($z * 1000000000) -1 ), SEEK_END);
    fwrite($f, "\0");
    }
    while(--$z > -1) {
    fseek($f, 999999999, SEEK_END);
    fwrite($f, "\0");
    }
    }
    else {
    fseek($f, $size - 1, SEEK_END);
    fwrite($f, "\0");
    }
    fclose($f);

    Return true;
    }

    Synx
    up
    12
    lorenzo dot stanco at gmail dot com
    11 years ago
    I want to give my contribution about the "read last lines from a file" topic. I've done some researches (starting from here, really) and run many tests for different algorithms and scenarios, and came up with this:

    What is the best way in PHP to read last lines from a file?
    http://stackoverflow.com/a/15025877/995958

    In that mini-article I tried to analyze all different methods and their performance over different files.

    Hope it helps.
    up
    6
    marc dot roe at gmail dot com
    18 years ago
    I tried to improve and modify (mail at ulf-kosack dot de)'s function. Actually it is very fast, i.e. requires much less time than to get the last five, ten or whatever lines of a file using file() ore file_get_contents().

    function read_file($file, $lines)
    {
    $handle = fopen($file, "r");
    $linecounter = $lines;
    $pos = -2;
    $beginning = false;
    $text = array();
    while ($linecounter > 0) {
    $t = " ";
    while ($t != "\n") {
    if(fseek($handle, $pos, SEEK_END) == -1) {
    $beginning = true; break; }
    $t = fgetc($handle);
    $pos --;
    }
    $linecounter --;
    if($beginning) rewind($handle);
    $text[$lines-$linecounter-1] = fgets($handle);
    if($beginning break;
    }
    fclose ($handle);
    return array_reverse($text); // array_reverse is optional: you can also just return the $text array which consists of the file's lines.
    }

    The good thing now is, that you don't get an error when your requesting more lines than the file contains. In this case the function will just return the whole file content.
    up
    7
    Anonymous
    16 years ago
    To:seeker at example com
    Be careful, though.
    You can freely position you pointer if you open a file in (r+) mode, but it will "overwrite" the data, not "append it".

    Tested this:

    <?php
    // file.txt content:
    // "You can contribute your notes to the PHP manual from the comfort of your browser!"

    $handler = fopen("file.txt", "r+");
    fseek($handler, 0);
    fwrite($handler, "want to add this");
    ?>
    New contents of the file.txt will be like this:
    "want to add thiste your notes to the PHP manual from the comfort of your browser!".

    If you really want to append at the beginning, you have to first get all the contents, save it, clear the file, put the new contents and append the saved contents at the end.
    up
    4
    Lutz ( l_broedel at gmx dot net )
    19 years ago
    Based on the function below, provided by info at o08 dot com (thanks), the following should enable you to read a single line from a file, identified by the line number (starting with 1):

    <?
    function readLine ($linenum,$fh) {
    $line = fgets ($fh, 4096);
    $pos = -1;
    $i = 0;

    while (!    feof($fh) && $i<($linenum-1)) {
    $char = fgetc($fh);
    if (    $char != "\n" && $char != "\r") {
    fseek($fh, $pos, SEEK_SET);
    $pos ++;
    }
    else     $i ++;
    }
    $line = fgets($fh);
    return     $line;
    }     //readLine()
    ?>
    up
    2
    Tom Pittlik
    15 years ago
    The tail example functions below will return a PHP memory limit error when trying to open large files. Since tail is convenient for opening large logs, here is a function that lets you (provided you have permission):

    <?php

    function unix_tail($lines,$file)
    {
    shell_exec("tail -n $lines $file > /tmp/phptail_$file");
    $output = file_get_contents("/tmp/phptail_$file");
    unlink("/tmp/phptail_$file");
    return     $output;
    }

    ?>
    up
    1
    ekow[at]te.ugm.ac.id
    18 years ago
    A little correction for code to read last line from chenganeyou at eyou dot com.
    $linenumber = sizeof($file)-1;
    should be
    $linenumber = sizeof($contents)-1;
    because sizeof will count array element, not file size.
    <?php
    function readlastline($file)
    {
    $linecontent = " ";
    $contents = file($file);
    $linenumber = sizeof($contents)-1;
    $linecontet = $contents[$linenumber];
    unset(    $contents,$linenumber);
    return     $linecontent;
    }
    ?>
    up
    6
    me at php dot net
    11 years ago
    how to read BIG files using fseek (above 2GB+, upto any size like 4GB+, 100GB+, 100 terabyes+, any file size, 100 petabytes, max limit is php_float_max ) ?

    // seek / set file pointer to 50 GB
    my_fseek($fp, floatval(50000000000),1);

    function my_fseek($fp,$pos,$first=0) {

    // set to 0 pos initially, one-time
    if($first) fseek($fp,0,SEEK_SET);

    // get pos float value
    $pos=floatval($pos);

    // within limits, use normal fseek
    if($pos<=PHP_INT_MAX)
    fseek($fp,$pos,SEEK_CUR);
    // out of limits, use recursive fseek
    else {
    fseek($fp,PHP_INT_MAX,SEEK_CUR);
    $pos -= PHP_INT_MAX;
    my_fseek($fp,$pos);
    }

    }

    hope this helps.
    up
    2
    Anonymous
    22 years ago
    Don't use filesize() on files that may be accessed and updated by parallel processes or threads (as the filesize() return value is maintained in a cache).
    Instead lock the opened file and use fseek($fp,0,SEEK_END) and ftell($fp) to get the actual filesize if you need to perform a fread() call to read the whole file...
    up
    0
    marin at sagovac dot com
    8 years ago
    Seek to a line of code than break from while to improve performance. Seek to specific line using SEEK_SET and get a specific line. If $range is '0' than will show seeked line. If set to '2' it will show current line + 2 lines above + 2 lines below.

    Useful for get a content of a file in very huge file to get lines range. To improve performance a while loop breaks from iteration than go for seeking.

    I've created a function that read a file and count lines and store into arrays each lines bytes to seek. If maximum specified by `linenum` is set, it will break from while to keep performance than in a new loop function to seek a position in bytes to get a content of file.

    function readFileSeek($source, $linenum = 0, $range = 0)
    {
    $fh = fopen($source, 'r');
    $meta = stream_get_meta_data($fh);

    if (!$meta['seekable']) {
    throw new Exception(sprintf("A source is not seekable: %s", print_r($source, true)));
    }

    $pos = 2;
    $result = null;

    if ($linenum) {
    $minline = $linenum - $range - 1;
    $maxline = $minline+$range+$range;
    }

    $totalLines = 0;
    while (!feof($fh)) {

    $char = fgetc($fh);

    if ($char == "\n" || $char == "\r") {
    ++$totalLines;
    } else {
    $result[$totalLines] = $pos;
    }
    $pos++;

    if ($maxline+1 == $totalLines) {
    // break from while to not read entire file
    break;
    }
    }

    $buffer = '';

    for ($nr=$minline; $nr<=$maxline; $nr++) {

    if (isset($result[$nr])) {

    fseek($fh, $result[$nr], SEEK_SET);

    while (!feof($fh)) {
    $char = fgetc($fh);

    if ($char == "\n" || $char == "\r") {
    $buffer .= $char;
    break;
    } else {
    $buffer .= $char;
    }
    }

    }
    }

    return $buffer;
    }

    Test results (1.3 GB file, 100000000 lines of codes, seek to 300000 line a code):

    string(55) "299998_abc
    299999_abc
    300000_abc
    300001_abc
    300002_abc
    "

    Time: 612 ms, Memory: 20.00Mb

    $ ll -h /tmp/testfile
    -rw-rw-r-- 1 1,3G /tmp/testfile
    up
    0
    kavoshgar3 at gmail dot com
    13 years ago
    sometimes we want read file from last line to beginning of file.I use the following.
    <?php
    function read_backward_line($filename, $lines, $revers = false)
    {
    $offset = -1;
    $c = '';
    $read = '';
    $i = 0;
    $fp = @fopen($filename, "r");
    while(     $lines && fseek($fp, $offset, SEEK_END) >= 0 ) {
    $c = fgetc($fp);
    if(    $c == "\n" || $c == "\r"){
    $lines--;
    if(     $revers ){
    $read[$i] = strrev($read[$i]);
    $i++;
    }
    }
    if(     $revers ) $read[$i] .= $c;
    else     $read .= $c;
    $offset--;
    }
    fclose ($fp);
    if(     $revers ){
    if(    $read[$i] == "\n" || $read[$i] == "\r")
    array_pop($read);
    else     $read[$i] = strrev($read[$i]);
    return     implode('',$read);
    }
    return     strrev(rtrim($read,"\n\r"));
    }
    //if $revers=false function return->
    //line 1000: i am line of 1000
    //line 1001: and i am line of 1001
    //line 1002: and i am last line
    //but if $revers=true function return->
    //line 1002: and i am last line
    //line 1001: and i am line of 1001
    //line 1000: i am line of 1000
    ?>
    Enjoy! Mail me if it works! ;-)
    up
    0
    necudeco at gmail dot com
    14 years ago
    This a tail php script example for windows system.

    <?php
    $n     = ( isset($_REQUEST['n']) == true )? $_REQUEST['n']:20;

    $offset = -$n * 120;

    $rs = fopen('C:/wamp/logs/apache_error.log','r');
    if (     $rs === false )
    die(    "No se pudo abrir el archivo de log");

    fseek($rs,$offset,SEEK_END);

    fgets($rs);
    while(!    feof($rs))
    {
    $buffer = fgets($rs);
    echo     $buffer;
    echo     "<hr />";
    }

    fclose($rs);
    ?>
    up
    2
    chenganeyou at eyou dot com
    19 years ago
    I use the following codes to read the last line of a file.
    Compared to jim at lfchosting dot com, it should be more efficient.

    <?php
    function readlastline($file)
    {
    $linecontent = " ";
    $contents = file($file);
    $linenumber = sizeof($file)-1;
    $linecontet = $contents[$linenumber];
    unset(    $contents,$linenumber);
    return     $linecontent;
    }
    ?>
    up
    1
    alan at peaceconstitution.com
    19 years ago
    Thanks to Dan, whose above comment provided a key to solve the issue of how to append to a file.
    After, using phpinfo(); I made sure my installation of PHP had the requisite settings mentioned in the text to the manual entry for fopen(), I was puzzled as to why my use of fopen() with the append option 'a' (append option) didn't work. Then I read a comment contributed to Appendix L (http://us2.php.net/manual/en/wrappers.php) that the append option 'a' for fopen() doesn't work as expected. The writer suggested using the 'w' option instead, which I found did work. But the 'w' option (write option) overwrites everything in the file.
    The question remained how to accomplish appending. Following Dan's suggestion about the 'r+' option, I tried this, which works fine:
    $string = "Message to write to log";
    $filehandle = fopen ("/home/name/sqllogs/phpsqlerr.txt", 'r+');
    fseek ( $filehandle,0, SEEK_END);
    fwrite ( $filehandle, $string."\n" );
    fclose ($filehandle);
    up
    0
    phil at NOSPAM dot blisswebhosting dot com
    19 years ago
    In order to read a text file from end->beginning e.g display the most recent contents of a log file first. I use the following.

    It basically just uses fseek to find the end of the file, ftell to find the byte count for a counter, then iterates backwards through the file using fgetc to test for the newline charater.

    $i=0 ;
    $lines=500 ;
    $fp = fopen($log,"r") ;
    if(is_resource($fp)){
    fseek($fp,0,SEEK_END) ;
    $a = ftell($fp) ;
    while($i <= $lines){
    if(fgetc($fp) == "\n"){
    echo (fgets($fp));
    $i++ ;
    }
    fseek($fp,$a) ;
    $a-- ;
    }
    }
    up
    0
    jim at lfchosting dot com
    21 years ago
    Here is a function that returns the last line of a file. This should be quicker than reading the whole file till you get to the last line. If you want to speed it up a bit, you can set the $pos = some number that is just greater than the line length. The files I was dealing with were various lengths, so this worked for me.

    <?php
    function readlastline($file)
    {
    $fp = @fopen($file, "r");
    $pos = -1;
    $t = " ";
    while (    $t != "\n") {
    fseek($fp, $pos, SEEK_END);
    $t = fgetc($fp);
    $pos = $pos - 1;
    }
    $t = fgets($fp);
    fclose($fp);
    return     $t;
    }
    ?>
    up
    -1
    ben at nullcreations dot net
    16 years ago
    easier tail() function for php:

    <?php
    function tail($file, $num_to_get=10)
    {
    $fp = fopen($file, 'r');
    $position = filesize($file);
    fseek($fp, $position-1);
    $chunklen = 4096;
    while(    $position >= 0)
    {
    $position = $position - $chunklen;
    if (    $position < 0) { $chunklen = abs($position); $position=0;}
    fseek($fp, $position);
    $data = fread($fp, $chunklen). $data;
    if (    substr_count($data, "\n") >= $num_to_get + 1)
    {
    preg_match("!(.*?\n){".($num_to_get-1)."}$!", $data, $match);
    return     $match[0];
    }
    }
    fclose($fp);
    return     $data;
    }
    ?>
    up
    -1
    Anonymous
    13 years ago
    I needed to stream a txt file (here big xml file) to get nodes blockwise. I couldn't find a shorter way. So i did write this class.

    Function: streams a complete file and returns the content between two search strings with their search strings (multi byte safe)

    Hope it helps anyone.

    PS: It lacks any boolean checks / exception handling for non existing files / read errors.

    <?php
    /**
    * Reads txt-files blockwise
    * Usage:
    $c_streamFileTxt = new streamFileTxt;
    $_args = array(

    'file' => 'temporary.xml',
    'start_string' => '<Product>',
    'stop_string' => '</Product>',
    'block_size' => '8192'
    );

    $c_streamFileTxt->setArgs($_args);

    while ($txt_block = $c_streamFileTxt->getNextBlock())
    {
    // use $txt_block for something
    }
    */

    class streamFileTxt
    {
    private     $handle;
    private     $file;
    private     $file_offset;
    private     $block;
    private     $start_string;
    private     $stop_string;
    private     $block_size;

    /**
    * Sett class arguments
    * @param array $_args
    */
    public function setArgs($_args)
    {
    $this->file = $_args['file'];
    $this->start_string = $_args['start_string'];
    $this->stop_string = $_args['stop_string'];
    $this->block_size = $_args['block_size'];
    }

    /**
    * Get next textblock within a file
    * @param void
    * @return string $textblock
    */
    public function getNextBlock()
    {
    $this->openFile();

    fseek($this->handle, $this->file_offset);
    $start_string_found = false;
    $stop_string_found = false;
    while (!    feof($this->handle))
    {
    $txt_block = fread($this->handle, $this->block_size);

    if (!    $start_string_found) // while not start start snippet found
    {
    $strpos = mb_strpos($txt_block, $this->start_string);
    if (    $strpos !== false)
    {
    // cut of first left chunk
    $txt_block = mb_substr($txt_block, $strpos, $this->block_size);
    $start_string_found = true;
    }
    }

    if (    $start_string_found && !$stop_string_found) // start snipped found, looking for stop snippet
    {
    $strpos = mb_strpos($txt_block, $this->stop_string);
    if (    $strpos !== false)
    {
    $removed_block_size = mb_strlen($txt_block) - $strpos;
    $txt_block = mb_substr($txt_block, 0, $strpos + mb_strlen($this->stop_string));
    $stop_string_found = true;
    $this->setFileOffset($removed_block_size);
    }
    }

    if (    $stop_string_found) // stop-snippet found, keep file offset, return
    {
    $this->closeFile();
    return     $txt_block;
    }
    }

    $this->closeFile();
    return     false;
    }

    /**
    * Set current file offset and consider the removed block size
    * current file position = current file offset - removed block size
    * @param int $removed_block_size
    */
    private function setFileOffset($removed_block_size)
    {
    $this->file_offset = ftell($this->handle) - $removed_block_size;
    }

    /**
    * close current file
    * @param void
    * @return void
    */
    private function openFile()
    {
    $this->handle = fopen($this->file, 'r');
    }

    /**
    * open file
    * @param void
    * @return void
    */
    private function closeFile()
    {
    fclose($this->handle);
    }
    }
    up
    -2
    lexica98 at gmail dot com
    10 years ago
    Opening the file in a+ mode doesn't work with fseek either, unfortunately. If you want a file created and then want be able to go to any position in the file, you'll have to use append mode when opening the file, then close it, then open it again in r+.
    up
    -3
    lucky at somnius dot com dot ar
    18 years ago
    Jim's (jim at lfchosting dot com) code for the last-line issue is perfect if the file is not empty, or moreover if it has more than one line. However if the file you're using cotains no new-line character at all (i.e. it is empty or it's got one line and only one) the while loop will stuck indefinitely.

    I know this script is meant for big files which would always contain at least several lines, but it would be clever to make the script error-proof.

    Thus, here's a little modification to his code.

    <?php
    function readLastLine ($file) {
    $fp = @fopen($file, "r");

    $pos = -1;
    $t = " ";
    while (    $t != "\n") {
    if (!    fseek($fp, $pos, SEEK_END)) { // *** - fseek returns 0 if successfull, and -1 if it has no succes as in seeking a byte outside the file's range
    $t = fgetc($fp);
    $pos = $pos - 1;
    } else {     // ***
    rewind($fp); // ***
    break; // ***
    } // ***
    }
    $t = fgets($fp);
    fclose($fp);
    return     $t;
    }
    ?>

    Lines added and/or modified have been marked with "// ***". I hope this helps!

    Regards!
    up
    -2
    steve at studio831 dot com
    15 years ago
    Modified @ben's function to work for files larger than PHP_INT_MAX bytes.

    <?php
    function longTail($file, $numLines = 100)
    {
    $fp = fopen($file, "r");
    $chunk = 4096;
    $fs = sprintf("%u", filesize($file));
    $max = (intval($fs) == PHP_INT_MAX) ? PHP_INT_MAX : filesize($file);

    for (    $len = 0; $len < $max; $len += $chunk) {
    $seekSize = ($max - $len > $chunk) ? $chunk : $max - $len;

    fseek($fp, ($len + $seekSize) * -1, SEEK_END);
    $data = fread($fp, $seekSize) . $data;

    if (    substr_count($data, "\n") >= $numLines + 1) {
    preg_match("!(.*?\n){".($numLines)."}$!", $data, $match);
    fclose($fp);
    return     $match[0];
    }
    }
    fclose($fp);
    return     $data;
    }
    ?>
    up
    -2
    mhinks at gmail dot com
    17 years ago
    Here's a function I wrote to binary search for a line of text within a file, particularly useful when the file is too large to read into memory at once and you want a faster search than linear.

    function binary_search_in_file($filename, $search) {

    //Open the file
    $fp = fopen($filename, 'r');

    //Seek to the end
    fseek($fp, 0, SEEK_END);

    //Get the max value
    $high = ftell($fp);

    //Set the low value
    $low = 0;

    while ($low <= $high) {
    $mid = floor(($low + $high) / 2); // C floors for you

    //Seek to half way through
    fseek($fp, $mid);

    if($mid != 0){
    //Read a line to move to eol
    $line = fgets($fp);
    }

    //Read a line to get data
    $line = fgets($fp);


    if ($line == $search) {
    fclose($fp);
    return $line;
    }
    else {
    if ($search < $line) {
    $high = $mid - 1;
    }
    else {
    $low = $mid + 1;
    }
    }
    }

    //Close the pointer
    fclose($fp);

    return FALSE;

    }
    up
    -2
    mail at ulf-kosack dot de
    18 years ago
    Here a little extension for the code of ekow.
    If you want to read more than one line and more than one file. Some times the last five ore ten lines are interesting in.

    You only have to submit a array with filenames and optionally a number of lines you want to read.

    <?php
    function read_logfiles($files, $lines=5)
    {
    foreach(    $files as $file_num => $file) {
    if (    file_exists ($file) ) {
    $handle = fopen($file, "r");
    $linecounter = $lines;
    $pos = -2;
    $t = " ";
    $text[$file_num] = "";
    while (    $linecounter > 0) {
    while (    $t != "\n") {
    fseek($handle, $pos, SEEK_END);
    $t = fgetc($handle);
    $pos --;
    }
    $t = " ";
    $text[$file_num] .= fgets($handle);
    $linecounter --;
    }
    fclose ($handle);
    } else {
    $text[$file_num] = "The file doesn't exist.";
    }
    }

    return     $text;
    ?>
    ＋add a note
    To Top