oci_connect

(PHP 5, PHP 7, PHP 8, PECL OCI8 >= 1.1.0)

oci_connect — Connect to an Oracle database

Опис

oci_connect(
    string $username,
    string $password,
    ?string $connection_string = null,
    string $encoding = "",
    int $session_mode = OCI_DEFAULT
): resource|false

Returns a connection identifier needed for most other OCI8 operations.

For performance, most applications should use persistent connections with oci_pconnect() instead of oci_connect(). See Connection Handling for general information on connection management and connection pooling.

The second and subsequent calls to oci_connect() with the same parameters will return the connection handle returned from the first call. This means that transactions in one handle are also in the other handles, because they use the same underlying database connection. If two handles need to be transactionally isolated from each other, use oci_new_connect() instead.

Параметри

username

The Oracle user name.

password

The password for username.

connection_string

Містить примірник Oracle для з'єднання. Це може бути або » Easy Connect string, або Connect Name з файлу tnsnames.ora, або назва локального примірника Oracle.

Якщо не вказано або null, то PHP використовує змінні оточення, як от TWO_TASK (в Linux) або LOCAL (у Windows) та ORACLE_SID, щоб визначити примірник Oracle для з'єднання.

Для використання методу називання Easy Connect, PHP має бути скомпоновано з Oracle 10g або новішими клієнтськими бібліотеками. Easy Connect string для Oracle 10g має форму [//]назва_хосту[:порт][/назва_сервісу]. Починаючи з Oracle 11g, синтаксис наступний: [//]назва_хосту[:порт][/назва_сервісу][:тип_сервера][/назва_примірника]. Додаткові можливості були запроваджені в Oracle 19c, як от налаштування обмеженого у часі та постійного з'єднання. Докладніше про це у документації Oracle. Назви служб можна побачити, запустивши утиліту Oracle lsnrctl status на машині сервера бази даних.

Файл tnsnames.ora може бути на шляху пошуку Oracle Net, що містить /ваш/шлях/до/instantclient/network/admin, $ORACLE_HOME/network/admin та /etc. Як варіант, можна встановити TNS_ADMIN, тоді буде прочитано файл $TNS_ADMIN/tnsnames.ora. Вебсервер має мати право на читання цього файлу.

encoding

Визначає набір символів, які використовують клієнтські бібліотеки Oracle. Кодування може не збігатися з тим, що використовує база даних. Якщо так, Oracle намагатиметься перекодувати дані. Залежно від кодування, це може не давати прийнятні результати. Перетворення також збільшуватиме час виконання.

Якщо не визначено, то клієнтські бібліотеки Oracle оберуть кодування, яке вказано в змінній оточення NLS_LANG.

Визначення цього параметра може скоротити час з'єднання.

session_mode

Цей параметр доступний, починаючи з PHP 5 (PECL OCI8 1.1) та має такі допустимі значення: OCI_DEFAULT, OCI_SYSOPER і OCI_SYSDBA. Якщо вказано OCI_SYSOPER або OCI_SYSDBA, то ця функція намагатиметься встановити привілейоване підключення за допомогою зовнішніх облікових даних. Привілейовані з'єднання початково вимкнені. Для увімкнення необхідно директиві oci8.privileged_connect встановити значення On.

У PHP 5.3 (PECL OCI8 1.3.4) вводиться значення режиму OCI_CRED_EXT. Воно вказує Oracle використовувати зовнішню автентифікацію або автентифікацію операційної системи, котра має бути налаштована в базі даних. Прапорець OCI_CRED_EXT дозволено використовувати тільки з іменем користувача "/" та порожнім паролем. oci8.privileged_connect може бути On або Off.

OCI_CRED_EXT можна поєднувати з режимами OCI_SYSOPER або OCI_SYSDBA.

OCI_CRED_EXT не підтримується у Windows з міркувань безпеки.

Значення, що повертаються

Returns a connection identifier or false on error.

Журнал змін

Версія	Опис
8.0.0, PECL OCI8 3.0.0	`connection_string` is now nullable.

Приклади

Приклад #1 Basic oci_connect() using Easy Connect syntax

<?php

// Connects to the XE service (i.e. database) on the "localhost" machine
$conn = oci_connect('hr', 'welcome', 'localhost/XE');
if (!$conn) {
    $e = oci_error();
    trigger_error(htmlentities($e['message'], ENT_QUOTES), E_USER_ERROR);
}

$stid = oci_parse($conn, 'SELECT * FROM employees');
oci_execute($stid);

echo "<table border='1'>\n";
while ($row = oci_fetch_array($stid, OCI_ASSOC+OCI_RETURN_NULLS)) {
    echo "<tr>\n";
    foreach ($row as $item) {
        echo "    <td>" . ($item !== null ? htmlentities($item, ENT_QUOTES) : "&nbsp;") . "</td>\n";
    }
    echo "</tr>\n";
}
echo "</table>\n";

?>

Приклад #2 Basic oci_connect() using a Network Connect name

<?php

// Connects to the MYDB database described in tnsnames.ora file,
// One example tnsnames.ora entry for MYDB could be:
//   MYDB =
//     (DESCRIPTION =
//       (ADDRESS = (PROTOCOL = TCP)(HOST = mymachine.oracle.com)(PORT = 1521))
//       (CONNECT_DATA =
//         (SERVER = DEDICATED)
//         (SERVICE_NAME = XE)
//       )
//     )

$conn = oci_connect('hr', 'welcome', 'MYDB');
if (!$conn) {
    $e = oci_error();
    trigger_error(htmlentities($e['message'], ENT_QUOTES), E_USER_ERROR);
}

$stid = oci_parse($conn, 'SELECT * FROM employees');
oci_execute($stid);

echo "<table border='1'>\n";
while ($row = oci_fetch_array($stid, OCI_ASSOC+OCI_RETURN_NULLS)) {
    echo "<tr>\n";
    foreach ($row as $item) {
        echo "    <td>" . ($item !== null ? htmlentities($item, ENT_QUOTES) : "&nbsp;") . "</td>\n";
    }
    echo "</tr>\n";
}
echo "</table>\n";

?>

Приклад #3 oci_connect() with an explicit character set

<?php

$conn = oci_connect('hr', 'welcome', 'localhost/XE', 'AL32UTF8');
if (!$conn) {
    $e = oci_error();
    trigger_error(htmlentities($e['message'], ENT_QUOTES), E_USER_ERROR);
}

$stid = oci_parse($conn, 'SELECT * FROM employees');
oci_execute($stid);

echo "<table border='1'>\n";
while ($row = oci_fetch_array($stid, OCI_ASSOC+OCI_RETURN_NULLS)) {
    echo "<tr>\n";
    foreach ($row as $item) {
        echo "    <td>" . ($item !== null ? htmlentities($item, ENT_QUOTES) : "&nbsp;") . "</td>\n";
    }
    echo "</tr>\n";
}
echo "</table>\n";

?>

Приклад #4 Using multiple calls to oci_connect()

<?php

$c1 = oci_connect("hr", "welcome", 'localhost/XE');
$c2 = oci_connect("hr", "welcome", 'localhost/XE');

// Both $c1 and $c2 show the same PHP resource id meaning they use the
// same underlying database connection
echo "c1 is $c1<br>\n";
echo "c2 is $c2<br>\n";

function create_table($conn)
{
    $stmt = oci_parse($conn, "create table hallo (test varchar2(64))");
    oci_execute($stmt);
    echo "Created table<br>\n";
}

function drop_table($conn)
{
    $stmt = oci_parse($conn, "drop table hallo");
    oci_execute($stmt);
    echo "Dropped table<br>\n";
}

function insert_data($connname, $conn)
{
    $stmt = oci_parse($conn, "insert into hallo
              values(to_char(sysdate,'DD-MON-YY HH24:MI:SS'))");
    oci_execute($stmt, OCI_DEFAULT);
    echo "$connname inserted row without committing<br>\n";
}

function rollback($connname, $conn)
{
    oci_rollback($conn);
    echo "$connname rollback<br>\n";
}

function select_data($connname, $conn)
{
    $stmt = oci_parse($conn, "select * from hallo");
    oci_execute($stmt, OCI_DEFAULT);
    echo "$connname ----selecting<br>\n";
    while (oci_fetch($stmt)) {
        echo "    " . oci_result($stmt, "TEST") . "<br>\n";
    }
    echo "$connname ----done<br>\n";
}

create_table($c1);

insert_data('c1', $c1);   // Insert a row using c1
sleep(2);                 // sleep to show a different timestamp for the 2nd row
insert_data('c2', $c2);   // Insert a row using c2

select_data('c1', $c1);   // Results of both inserts are returned
select_data('c2', $c2);   // Results of both inserts are returned

rollback('c1', $c1);      // Rollback using c1

select_data('c1', $c1);   // Both inserts have been rolled back
select_data('c2', $c2);

drop_table($c1);

// Closing one of the connections makes the PHP variable unusable, but
// the other could be used
oci_close($c1);
echo "c1 is $c1<br>\n";
echo "c2 is $c2<br>\n";


// Output is:
//    c1 is Resource id #5
//    c2 is Resource id #5
//    Created table
//    c1 inserted row without committing
//    c2 inserted row without committing
//    c1 ----selecting
//        09-DEC-09 12:14:43
//        09-DEC-09 12:14:45
//    c1 ----done
//    c2 ----selecting
//        09-DEC-09 12:14:43
//        09-DEC-09 12:14:45
//    c2 ----done
//    c1 rollback
//    c1 ----selecting
//    c1 ----done
//    c2 ----selecting
//    c2 ----done
//    Dropped table
//    c1 is
//    c2 is Resource id #5

?>

Примітки

Зауваження:
An incorrectly installed or configured OCI8 extension will often manifest itself as a connection problem or error. See Installing/Configuring for troubleshooting information.

Прогляньте також

oci_pconnect() - Connect to an Oracle database using a persistent connection
oci_new_connect() - Connect to the Oracle server using a unique connection
oci_close() - Closes an Oracle connection

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 9 notes

down

M0no at ethonfusino dot com ¶

21 years ago


If your oracle database is on a remote system within your local network and you don't want to worry about the tnsnames file you can try this.



$db = "(DESCRIPTION=(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.XX.XXX)(PORT = 1521)))(CONNECT_DATA=(SID=XXXX)))";



$c1 = ocilogon("name","password",$db);



Hope this helps someone.

down

Leandro da Cunha Campos ¶

15 years ago


ONE ALTERNATIVE OF CONNECT IN ORACLE RAC "Real Application Clusters"



<?php

$dbstr ="(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST =ip1)(PORT = 1521))

(CONNECT_DATA =

(SERVER = DEDICATED)

(SERVICE_NAME = banco)

(INSTANCE_NAME = banco1)))"; 

 

$dbstr1 ="(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST =ip2)(PORT = 1521))

(CONNECT_DATA =

(SERVER = DEDICATED)

(SERVICE_NAME = banco)

(INSTANCE_NAME = banco2)))"; 

 

if(!@($conn = oci_connect('user','password',$dbstr1)))

{ $conn = oci_connect('user','password',$dbstr) or die (ocierror()); }

?>

down

sixd at php dot net ¶

16 years ago


If you want to specify a connection timeout in case there is network problem, you can edit the client side (e.g. PHP side) sqlnet.ora file and set SQLNET.OUTBOUND_CONNECT_TIMEOUT. This sets the upper time limit for establishing a connection right through to the DB, including the time for attempts to connect to other services.   It is available from Oracle 10.2.0.3 onwards.

In Oracle 11.1, a slightly lighter-weight solution TCP.CONNECT_TIMEOUT was introduced.  It also is a sqlnet.ora parameter.  It bounds just the TCP connection establishment time, which is mostly where connection problem are seen.

The client sqlnet.ora file should be put in the same directory as the tnsnames.ora file.

down

sebastien.barbieri _at_ gmail dot com ¶

18 years ago


When you are using Oracle 9.2+ I would say that you MUST use the CHARSET parameter.

Of course, you will not notice it until there is accented character... so just specify it and you will avoid a big headache.

So for example here is our Oracle internal conf:
select * from nls_database_parameters;
 
PARAMETER                      VALUE
------------------------------ ----------------------------------------
…
NLS_LANGUAGE                   AMERICAN
NLS_TERRITORY                  AMERICA
NLS_ISO_CURRENCY               AMERICA
NLS_CHARACTERSET               WE8ISO8859P15
…
 
And there our oci_connect call:

$dbch=ocilogon($user,$pass,$connectString,"WE8ISO8859P15");

Without that, you will get question mark (inversed), squares… instead of most accented character.

Don’t forget to use that for writing as well as for reading.

down

blake dot lewis at gmail dot com ¶

11 years ago


Using ldap for Oracle name resolution:

  The web server will need the environmental variable TNS_ADMIN='Directory of tnsname.ora' unless the default location is used. I use '/etc/tns_admin'. Confirm using the phpinfo().

  There are three files needed in the TNS_ADMIN location: tnsnames.ora, sqlnet.ora and ldap.ora. If you are only using ldap, tnsnames.ora is not needed.

  To sqlnet.ora add:
     NAMES.DIRECTORY_PATH=(TNSNAMES,LDAP)

  To ldap.ora add:
     DIRECTORY_SERVERS=(ldap_server_fqdn:port)
     DEFAULT_ADMIN_CONTEXT=""
     DIRECTORY_SERVER_TYPE=OID

  For a quick and dirty ldap tnsnames server use tnsManager by Dave Berry. Oracle OID or Openldap can used, but are complicated to setup. tnsManager is a no brainer. The quick part: give it a tnsnames.ora file and start it up. The dirty parts: I can't get Toad and SQLDeveloper to work with it, it ignores the domain and it is no longer being maintained.

  The order of values in NAMES.DIRECTORY_PATH in sqlnet.ora determines which look up 'adapter' is used, in this case it is tnsnames.ora file and then ldap. I use ldap for general consumption and tnsnames.ora file to override ldap or entries that are not for general consumption.

  If you have the full Oracle client you have tnsping. 'tnsping ORACLE_SID' will tell you what adapter you are using: 'Used LDAP adapter to resolve the alias'.

<?php
  echo system("/PATH/tnsping ".$ORACLE_SID." 2>&1")."<br />";
  echo 'TNS_ADMIN='.getenv('TNS_ADMIN');
?>

ISSUE:
  If connecting with only ORACLE_SID and not ORACLE_SID.DB_DOMAIN, the value of NAMES.DEFAULT_DOMAIN from sqlnet.ora is appended, then for some reason PHP tries the HOSTNAME adapter, and if the database name resolves in DNS, it will fail connecting using the database name as the hostname, because neither SID nor SERVICE_NAME are defined.
  If using tnsManager append '.ANY_DOMAIN' to $ORACLE_SID to hack around the issue above.

  I have tested with:
       11.1.0.7 full client and PHP 5.1.6
       11.2.0.2 full client and PHP 5.4.11

  I have heard that LDAP lookup does not work with older instantclients.

down

drew dot carmichael at gmail dot com ¶

15 years ago


When using the OCI_CRED_EXT in php 
if the ENV $ORACLE_SID is set the DB does not need to be specified explicitly and the connection will fail unless you provide a NULL DB value when creating the connection. 

The $ORACLE_SID trumps the TNS name look up for the connection. So even a manual connection string in the DB parameter will fail.

So when the $ORACLE_SID Env is set a NULL passed instead of the DB name connects successfully. 

Hope this saves some hair pulling when moving to %.3 and OS Authentications

down

Jonathon Robinson ¶

14 years ago


Regarding the following statement in the documentation:

"The second and subsequent calls to oci_connect() with the same parameters will return the connection handle returned from the first call."



There's one caveat here.  Subsequent calls to oci_connect() will only return the same connection handle as the first call as long as a reference is held to the original handle.



For example, the following code will generate *one* connection handle:



<?php

$dbh = oci_connect($username, $password, $conn_info);

// Do stuff

$dbh = oci_connect$username, $password, $conn_info);

// Do more stuff



The follow code will generate *two* connection handles:

getData();

// Do stuff

getData();

// Do more stuff



getData() {

    $dbh = oci_connect($username, $password, $conn_info);

    // Do stuff

}

?>



This is the result of PHP garbage collecting the handle at the end of the method scope.



If you want to isolate your DB layer through function calls but still want to leverage the fact that oci_connect can return the same handle, just keep a reference to the handle like so:



<?php

getData($username, $password, $conn_info) {

    $dbh = oci_connect($username, $password, $conn_info);

    $key = hash('md5', "$username|$password|$conn_info");

    $GLOBALS[$key] = $dbh;

    // Do stuff

}

?>



I originally logged this as a bug but apparently this is the expected behaviour, likely because oci_close($dbh) just calls unset($dbh).

down

-4

ben at onshop dot co dot uk ¶

19 years ago


There is a useful solution to the problem of securing connection information in the PHP Cookbook (O'Reilly) by David Sklar and Adam Trachtenberg. They propose using 'SetEnv' in the Apache configuration and then accessing the values from within a script using $_SERVER.



Unfortunately using the 'SetEnv' solution exposes your connection information to all users of that virtual host. If they run phpinfo.php or display $_SERVER, I found that they will see the password from any file under the root of that virtual host.



To restrict exposure to a particular directory or specific file:



1. First put an 'Include' to the secret file in httpd.conf. For example:



Include "/web/private/secret.txt"



2. In the password file, use the 'SetEnvIf' directive to enable the Environment variables by directory only or within a specific file. For example:



- For all files in the directory:



SetEnvIf Request_URI "/path/to/my/directory" ORACLE_PASS=5gHj790j



- For a specific file in the directory



SetEnvIf Request_URI "/path/to/my/directory/connection.oracle.php" ORACLE_PASS=5gHj790j

down

-5

blake dot lewis at gmail dot com ¶

11 years ago


Using ldap for Oracle name resolution:



  The web server needs the environmental variable TNS_ADMIN='Directory of tnsname.ora'. I use '/etc/tns_admin'. Confirm using the phpinfo() function.



  There are three files needed in the TNS_ADMIN location: tnsnames.ora, sqlnet.ora and ldap.ora. If you are only using ldap, tnsnames.ora is not needed.



  To sqlnet.ora add: 

     NAMES.DIRECTORY_PATH=(TNSNAMES,LDAP)



  To ldap.ora add:

     DIRECTORY_SERVERS=(ldap_fqdn_hostname:1575)

     DEFAULT_ADMIN_CONTEXT=""

     DIRECTORY_SERVER_TYPE=OID



  For a quick and dirty ldap tnsnames server use tnsManager by Dave Berry. Oracle OID or Openldap can used, but are complicated to setup. tnsManager is a no brainer. The default port is 1575.



  The order of values in NAMES.DIRECTORY_PATH from sqlnet.ora determines which look up 'adapter' is used first, in this case it is tnsnames.ora file and then ldap. I use ldap for general consumption and tnsnames.ora file to override ldap or entries that are not for general consumption.



  If you have the full Oracle client you have tnsping. 'tnsping ORACLE_SID' will tell you what adapter you are using: 'Used LDAP adapter to resolve the alias'.



<?php

  echo system("/PATH/tnsping ".$ORACLE_SID." 2>&1")."<br />";

  echo 'TNS_ADMIN='.getenv('TNS_ADMIN');

?>



ISSUE:

  For some reason PHP tries the HOSTNAME adapter first, and if the database name resolves in DNS, it will try connecting using the database name as the hostname with no SID or SERVICE_NAME defined. All other Oracle clients I have used will not try the HOSTNAME adapter unless it is listed in NAMES.DIRECTORY_PATH.

  I have heard that LDAP look up does not work with older instantclients.

＋add a note